Drgem X Ray Service Manual Install

Test the electromagnetic brakes by applying power to the table foot switches. 3. X-Ray Tube and Collimator Mounting

Double-check that all interconnections match the circuit diagrams provided in the service manual appendix. Ensure the room door interlock switch is functional. First Power-On

The installation space must accommodate the chosen system configuration. DRGEM offers flexible mounting options including ceiling-mounted rail systems, floor-to-wall ceiling rails, and floor-mounted rail configurations. Ceiling and floor-mounted setups ensure seamless integration into any clinical or diagnostic environment. drgem x ray service manual install

The floor must support a minimum weight density of 500 kg/m² for fixed systems.

Some users report delayed startup where the console takes 25–30 minutes to boot when starting from a cold state. Potential causes identified by experienced technicians include problems with the power supply board located at the front, or contactors on the right side of the generator that may swell and cause solenoid drag. Other possibilities include defective capacitors in the power supply that prevent the power level from reaching proper values. Test the electromagnetic brakes by applying power to

Check the supply voltage readout on the console to ensure it falls within acceptable limits. Tube Seeding/Seasoning Procedure

Connect the system to the facility’s power supply following the specifications in the service manual. Proper grounding is essential for both safety and electrical noise reduction. The high-voltage generator connections must be made with appropriate gauge wiring and termination methods. All electrical work should be performed by qualified personnel in accordance with local electrical codes. Ensure the room door interlock switch is functional

Secure the floor rails or ceiling mounts first. Use a spirit level to ensure the vertical column is perfectly upright.

Once the physical hardware is secured, the focus shifts to software integration and calibration. This stage involves:

DRGEM Corporation, headquartered in Gumi-si, Gyeongsangbuk-do, South Korea, has established itself as a leading manufacturer of medical imaging equipment with a global footprint. The company produces a wide range of digital X-ray systems used in hospitals, clinics, and diagnostic imaging centers worldwide. Their product lineup includes the GXR Series high-frequency generators, U-Arm Diamond systems, TOPAZ mobile X-ray units, and various digital radiography solutions.