: Activates the snooze function, adjusts display brightness, or turns the display on/off.
Welcome to your new DT-6507 LED Mirror Clock. This sleek device functions as a standard mirror, a digital clock, an alarm, and a temperature monitor. To get the most out of your device, please follow the setup and operating instructions below.
The DT-6507 is designed for plug-in use to maintain the bright LED display.
Press and hold the button for 3 seconds until the alarm hour digits start flashing. Press UP or DOWN to set the desired wake-up hour. Press ALARM once to confirm. The minute digits will flash. Press UP or DOWN to set the minutes. dt-6507 led mirror clock instructions
The DT-6507 is a remarkably easy-to-use and stylish device that brings together modern design and essential daily functions. By understanding its intuitive controls and following the steps in this guide, you can master all its features—from setting a reliable alarm to automatically dimming the display for a good night's rest. With a little care, this mirror clock will be a durable and appreciated part of your daily routine for a long time.
Fix : Plug the clock into a wall adapter or USB port using the provided cable for a permanently lit screen. Keep batteries inside as a backup for power outages. Cause : There are no backup batteries installed.
: This happens because the clock is running on battery power. Plug the clock into a USB power source for continuous display. : Activates the snooze function, adjusts display brightness,
Press and hold the button for 3 seconds until the screen flashes.
: After each successful setting adjustment, the display will automatically exit setting mode if no buttons are pressed for approximately 10 seconds.
Press once. The snooze interval digits will flash (default is 5 minutes). Press UP or DOWN to change the snooze duration from 5 to 60 minutes. Press ALARM to finalize. Activating and Deactivating the Alarm To get the most out of your device,
: Changes unit preferences (Celsius vs. Fahrenheit) and decreases value digits. 📅 Step-by-Step Programming Guide 1. How to Set the Time
If the clock beeps or shifts, it has toggled the loop function. If it continues to cycle, press to cycle to the Temperature screen, hold DOWN , and switch back to Time. A stable screen indicates the loop is successfully turned off. Troubleshooting Common Issues The screen keeps turning off after 10-16 seconds.
Issue: The time display keeps switching randomly to the temperature and date. : The clock is set to its cyclic carousel mode.
A: The DT-6507 is designed with a fixed automatic dimming schedule (18:00 to 06:00) that cannot be turned off. If you need different behaviour, you can manually adjust the brightness using the UP button.