:
Boot from the USB, go through the setup steps until you reach the "Where do you want to install Windows?" screen. Load Driver: Click Load Driver at the bottom left.
Your drive should now appear in the list, allowing you to continue the installation. f6flpyx64 intel vmdzip
But in the system tray, a new icon had appeared: not Intel’s logo, but a small, unlabeled square that pulsed with a soft blue light every thirty seconds.
Run the following command: SetupRST.exe -extractdrivers SetupRST_extracted : Boot from the USB, go through the
driver files directly onto a bootable USB. This is critical if you are preparing installation media on a non-Windows machine, like a Linux or macOS system, where the cannot be run. Intel Community How to Use the Feature
. It is specifically designed to allow the Windows installer to recognize modern NVMe Solid State Drives (SSDs) on systems using Intel’s 11th Generation (and newer) processors. Modern Intel CPUs use Volume Management Device (VMD) But in the system tray, a new icon
The f6flpyx64 VMD driver is a necessary step in the modern Windows installation process on Intel systems. While Intel has complicated the process by moving to .exe installers, extracting the necessary .inf files allows you to quickly bypass the "no drives found" error and proceed with your installation.
However, a major side effect is that . If your BIOS has VMD enabled (which is often the default on new OEM systems like Dell, Lenovo, and HP), the Windows installer will not see your NVMe SSD until you load the f6flpyx64 VMD driver.
: