| Section | Content | |---------|---------| | | Water supply connection (3/4" threaded hose), drain hose height (min 50 cm, max 110 cm), leveling feet adjustment, electrical connection (220-240V, 50Hz, 10A fuse). | | Control Panel | Explanation of program selector dial, start/pause button, half-load button (if equipped), and indicator lights (salt, rinse aid, end of cycle). | | Programs | Typical cycles: Intensive (70°C), Normal (65°C), Eco (50°C), Rapid (30-40°C), Glass/Soak. | | Water Softener | How to set the softener level (based on local water hardness: H1 to H5) and refill dishwasher salt. | | Filters & Maintenance | Cleaning the triple filter system (coarse, fine, microfilter) and spray arms. | | Error Codes | E1 (water inlet issue), E2 (drain problem), E4 (flood protection active). |
Remove heavy food soil, bones, and toothpicks from plates before racking. Commercial dishwashers dissolve grease and sanitise; they are not garbage disposals.
Turn the power switch to the "ON" position. The machine will begin to fill and heat. fagor fi80 dishwasher manual
Inspect the suction tubes for the detergent and rinse-aid pumps. Ensure they are fully submerged in chemical products and free of air bubbles. Troubleshooting and Error Codes
Daily and weekly maintenance prevents limescale buildup, protects mechanical components, and ensures consistent sanitization. Daily Maintenance (End of Shift) Switch off the power and open the door. | Section | Content | |---------|---------| | |
Wait for the ready lights to signal that temperatures have reached operational standards: 150°F to 160°F (65°C to 71°C).
While not a "button," the FI-80 manual highlights a specific maintenance feature designed for user convenience: | | Water Softener | How to set
Regular maintenance is critical for performance and to avoid voiding the warranty
For service, contact or an authorised industrial dishwasher repair centre.
I can provide the specific technical steps or schematics to resolve your issue. Share public link
Fagor dishwashers use error codes to communicate specific issues. If your FI80 is equipped with a display, you may see a code like F1, F2, etc. Here's a quick reference guide based on common Fagor fault codes: