Gordak 952 User Manual Updated Jun 2026

2.0 (Updated) Compatible with: Gordak 952, 952A, 952B variants (differences in knob layout only)

Do not dispose of electrical equipment in household waste. Follow local WEEE regulations for recycling electronic components.

Carefully remove the station, iron stand, and hot air gun. gordak 952 user manual updated

The station is designed for precise temperature control and reliability across various SMD components like QFP, SOP, and PLCC. Hot Air Rework Station Soldering Iron Station Power Consumption 270W – 650W (model dependent) 50W – 60W Temperature Range 100°C – 500°C 200°C – 480°C Diaphragm Pump Max Airflow 0.12 – 120 L/min Heating Element Metal Heating Core Ceramic Heating Element 2. Essential Pre-Operation Setup

However, Gordak had kept the Gordak 952 under wraps since its creation, making it available only to a select few. The reason? Gordak believed that with great power comes great responsibility, and he wanted to ensure the device didn't fall into the wrong hands. The station is designed for precise temperature control

Clean the tip thoroughly using brass wool and tip tinner. Perform the calibration steps listed above. Nozzle is clogged or air hose is kinked.

The hot air gun includes a delayed auto-cool system that shuts down when the temperature drops, extending heater life. The reason

Place the iron tip onto an external thermocouple thermometer probe. Allow the reading to stabilize for two minutes. If the external thermometer reads higher or lower than 350∘C350 raised to the composed with power C

Never leave the soldering iron sitting hot and dry. Always leave a layer of fresh solder on the tip before placing it in the stand or turning off the machine.

The front panel features dual analog dials and independent power switches for both tools. Hot Air Rework Section