How To Reset Geepas Smart Tv New [ 100% Top ]

Use the directional pad to locate options labeled , Factory Reset , Shipping Init , or Restore Default .

Unplug the TV from power.

Locate the physical and Volume Down (-) buttons on the TV panel. Press and hold both buttons simultaneously. Keep holding the buttons and plug the power cord back in. how to reset geepas smart tv new

Look for Reset – this could be under:

If the soft reset fails to remedy persistent problems—such as the television continuously rebooting, apps crashing at launch, or the inability to connect to Wi-Fi—a full factory reset is necessary. The process for a factory reset on a Geepas Smart TV typically occurs through the on-screen settings menu, though it may vary slightly depending on the underlying operating system (usually Android TV or a similar Linux-based OS). To begin, navigate to the icon, which is typically represented by a gear symbol. From there, scroll to Device Preferences or System , then select Reset or Factory Data Reset . The television will often ask for a PIN or password; the default for many Geepas models is 0000 or 1234, though a user may have set a custom code. After confirming the choice, the TV will power off and begin the erasure process, which can take several minutes. Once completed, the screen will reboot to the initial setup wizard, just as it appeared when first unboxed. Use the directional pad to locate options labeled

If your TV screen turns on and responds to the remote control, you can execute a standard menu reset. Geepas Smart TVs generally run on an Android-based operating system, so the settings layout will closely mirror standard Android TV menus. Option A: Standard Android Interface How to Reset Smart Tv to its Factory Settings

While continuing to hold the buttons, plug the power cord back into the outlet. Press and hold both buttons simultaneously

Select Erase Everything to confirm. If prompted for a PIN, try default codes like 0000 or 1234 . 2. Hard Reset (When Unresponsive or No Remote)

Always try Method A first. If the TV is unresponsive, move to Method C with caution. If the TV is stuck on the logo screen, contact Geepas support, as this is a hardware/firmware failure that a user reset cannot fix.