Huawei Lual02 Firmware Flash File Mt6735m Dead Hang Logo Done Repack ✦

: Try flashing without the battery or check if your USB cable is data-compatible.

🚫 DO NOT USE. This completely deletes your phone’s NVRAM partition, causing a permanent "Invalid IMEI" or "No Service" error.

Huawei LUAL02 Processor: MediaTek MT6735M Issue: Dead Boot, Hang on Logo, or Stuck in Bootloop Solution: Repartition / Flash with Stock ROM : Try flashing without the battery or check

: Use a high-quality cable to avoid connection drops during the process. 2. Preparing the SP Flash Tool Launch the Tool : Extract the SP Flash Tool ZIP and run flash_tool.exe as an administrator Load Scatter File : Click on the Scatter-loading

: Open your PC's Device Manager to verify the driver status. Step-by-Step Flashing Procedure Huawei LUAL02 Processor: MediaTek MT6735M Issue: Dead Boot,

: The phone continuously restarts without reaching the home screen.

The computer should detect the device, and a will appear in SP Flash Tool, indicating the flashing process has started. Step 4: Completion Hang on Logo

Ensure you are using the correct MTK VCOM driver. Alternatively, try connecting the device without holding any hardware buttons. Device Still Stuck on Huawei Logo After Flashing

Ensure the scatter file strictly matches the MT6735M version of your Huawei LUA-L02.