Connect a neutral wire from the DB board's neutral bar to the N terminal at the top.
This usually indicates the internal backup battery is reaching the end of its life (typically 3–5 years). 7. Recommended Energy Saving Schedule
The front face of the new KES timer features a digital LCD screen and six primary control buttons. kes geyser load control timer manual new
The KES Geyser Load Control Timer manual provides detailed instructions on how to install, operate, and troubleshoot the device. The manual covers the following topics:
Press the button once. The screen will display 1 ON on the left side, indicating the first activation window. Connect a neutral wire from the DB board's
Press the button to cycle the indicator line at the bottom of the LCD screen. Set the indicator to AUTO .
Press the button once. The screen will display 1 ON in the lower-left area, representing your first turn-on time. Recommended Energy Saving Schedule The front face of
Ensure the main circuit breaker is switched on. Leave the unit powered for at least 30 minutes to allow the internal battery to recharge. If the screen remains blank, the unit may need replacement. The Geyser Does Not Turn On at Scheduled Times
If the above does not match your specific unit, you can try the following search terms on Google or the manufacturer's website:
Connect the wire from the main breaker to the terminal marked LIN (Live In) or Terminal 1.