Take an Ethernet cable. Plug one end into the WAN (Internet) port of your KJ33 router. Plug the other end into the Ethernet port of your modem.
: The wizard will ask for your internet type. Most internet service providers (ISPs) use Dynamic IP (DHCP) , which automatically detects your settings. If your provider requires a username and password, select PPPoE and enter the credentials provided by your ISP. kj33 router setup
The Wizard will prompt you to change the default admin password used to log into the router configuration page. Changing this password prevents unauthorized users who connect to your Wi-Fi from altering your router settings or viewing your network logs. Step 4: Save and Apply Take an Ethernet cable
If you frequently host visitors, enable a Guest Network. This creates a secondary Wi-Fi network that lets guests access the internet without giving them access to your primary network, shared folders, or smart home devices. Go to the or Guest Network tab. Toggle the Guest Network to Enabled . : The wizard will ask for your internet type
: Create a strong Wi-Fi password (at least 8 characters, including numbers and symbols).
: Look at the sticker on the bottom of the router for the default (network name) and (password). Via Ethernet
After applying settings, go to . You should see a valid IP address (not 0.0.0.0) and a default gateway. If you see nothing, double-check your PPPoE password.