Lovato 31 Rgam 12 User Manual Jun 2026

: Single-phase voltage and frequency monitoring.

Clear display for parameters, alarms, and engine status.

Periodically runs the generator to ensure it is operational without necessarily switching the load. Common Alarm Codes lovato 31 rgam 12 user manual

features a front-facing 3-digit LED display and a built-in RS232 port for localized software diagnostics and remote telemetry setups.

Once the engine fires, the controller detects generator voltage. It waits for the warm-up timer () to expire, then closes the generator contactor to power the load. Phase 4: Grid Return and Cooldown : Single-phase voltage and frequency monitoring

The current range. RGAM 12 = 9–12 A. RGAM 18 = 12–18 A. Choose based on motor FLA.

For detailed technical guidance, you can view the Lovato RGAM series manual or the RGAM software manual for remote configuration. Common Alarm Codes features a front-facing 3-digit LED

Verify the fuel solenoid output is receiving 12V DC. Check fuel levels and lines. Voltage or frequency out of range.

The unit features a front panel with a 3-digit display and LED indicators for status and alarms.

The Lovato 31 RGAM 12 is maintenance-free under normal conditions. However, in harsh environments:

The 31 RGAM 12 uses specific codes to indicate system failures: Low oil pressure A02: Engine overheating A04: Failure to start (match) A05 / A06: Low or high battery voltage A09 / A10: Generator over-frequency or low frequency A13: Emergency stop triggered 💻 Configuration & Remote Software