Mikrotik L2tp Server Setup Full High Quality -

/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade out-interface-list=WAN

: The IP address of your router (e.g., 192.168.89.1 ) Remote Address : vpn_pool

The profile defines how the connection behaves, including the local address (router side) and remote address (client side). Go to > Profiles . Click + to add a new profile. Name: l2tp-profile mikrotik l2tp server setup full

We need a pool of IPs to hand out to remote clients. This must conflict with your local LAN.

In this article, we've provided a comprehensive guide on how to set up a Mikrotik L2TP server. We've covered the prerequisites, configuration steps, and testing procedures. By following these steps, you should be able to establish a secure and reliable L2TP connection to your Mikrotik router. /ip firewall nat add chain=srcnat src-address=192

Double-click your local bridge interface (usually named bridge or bridge-local ). Find the dropdown menu on the General tab. Change it from enabled to proxy-arp . Click OK . 💻 Client-Side Connection Example (Windows 10/11)

To make sure this works for your specific network, let me know: Are your clients using ? Do you have a Static Public IP or are you using DDNS ? Name: l2tp-profile We need a pool of IPs

Under the tab, ensure Use Encryption is set to yes . 3. Create VPN Users (Secrets) Each user needs a unique username and password to connect. In the PPP window, go to the Secrets tab. Click + . Name : user1 Password : StrongPassword123 Service : l2tp Profile : l2tp-profile 4. Enable the L2TP Server Now, activate the server and enforce IPsec for security. In the PPP window, go to the Interface tab. Click the L2TP Server button. Check Enabled . Default Profile : l2tp-profile .

# Pool /ip pool add name=l2tp-pool ranges=192.168.100.10-192.168.100.100