: Typically appears as an open network named LG_Smart_Tap_XXXX or Uplus_Smart_Plug_XXXX .
Supports remote engine cut-off (immobilization) and allows for the creation of safe zones (geofencing) with alerts for entry/exit. mttlw01 manual verified
| Problem | Likely Cause | Solution (from manual) | |------------------------------|----------------------------------|-------------------------------------------------------------| | Outlet won’t turn on | Overload protection triggered | Unplug some devices, then press the outlet’s button again. | | Wi‑Fi LED not blinking | Not in pairing mode | Reset the strip by unplugging for 10 seconds, then re‑press the master button for 5 seconds. | | App cannot find device | Phone on 5GHz Wi‑Fi | Switch to 2.4GHz Wi‑Fi; disable “5GHz preferred” in router settings. | | One USB port not charging | Overcurrent protection | Unplug the USB device, wait 10 seconds, then reconnect. | | Outlet stays on after timer | App sync failure | Delete the timer in the app, re‑set it, and sync. | : Typically appears as an open network named
If you've been searching for a smart power strip that combines heavy‑duty performance with advanced safety features, the has likely caught your attention. Also known as the LG Smart Power Plug MTTL‑W01 or the T.C.L‑MTTL‑W01, this 3,520W/16A power strip offers four individually controlled outlets, two USB charging ports, Wi‑Fi connectivity, and a verified manual that confirms its standout overload‑protection circuit and standby power‑cut function. This guide walks you through everything you need to know—from key specs and manual verification to setup, safety, and troubleshooting. | | Wi‑Fi LED not blinking | Not
| Issue | Possible Cause(s) | Recommended Solution(s) | | :--- | :--- | :--- | | | Incorrect password; 5GHz network; device out of range | Ensure password is correct; Connect to a 2.4GHz network; Move closer to router | | App can't find the power strip | Not in pairing mode; phone's Bluetooth off | Check manual for correct button sequence to enter pairing mode; Enable Bluetooth on your phone | | An outlet is unresponsive | Circuit overload triggered; Outlet manually turned off | Check load, reduce if necessary, and reset the device; Check on/off status in the app | | Power strip keeps turning off | Overload protection active due to high total wattage | The combined load exceeds 3520W; Unplug some devices to reduce total wattage |
: Find and download the LG Smart ThinQ or designated Korean home utility app on your mobile device.
[ HARDWARE ARCHITECTURE DIAGRAM ] +-------------------------------------------------------+ | [O I] Master Manual Switch & Overload Reset Button | +-------------------------------------------------------+ | (::) (::) (::) (::) [=][=] | | Outlet 1 Outlet 2 Outlet 3 Outlet 4 USBs | | (Indep.) (Indep.) (Indep.) (Indep.) (Group)| +-------------------------------------------------------+ | [ * ] Wi-Fi Status Indicator LED | +-------------------------------------------------------+ Core Features