4000 Test Answers Updated !link! - Transas Navi Sailor

Question 1: What happens if the configured Safety Contour value is not available on the loaded ENC?

This setting (Scale Minimum) is checked under Chart Settings to see if it has been applied to ENC display layers. System Indicators:

Whether you need a step-by-step walkthrough for or route checks? Share public link

Plotting waypoints, adjusting turn radii, and setting corridor widths (XTD - Cross Track Distance). transas navi sailor 4000 test answers updated

Beyond memorising answers, examiners expect you to understand how the system thinks. Here are the most critical operational concepts that appear repeatedly.

Verify the status of the and update history to prove compliance to Port State Control (PSC). 3. Route Planning and Validation

If you rely on answer sheets from 2018 or earlier, you will likely fail the updated test on v4.0. Question 1: What happens if the configured Safety

Go to Chart Portfolio -> Update -> Review the date of the latest Correction or T&P notes. Q: What is the procedure to set the Safety Contour?

: This is a forward-facing cone or corridor projecting ahead of the vessel. You configure it by setting a Time (e.g., 15 minutes) and a Width (e.g., 0.5 nautical miles).

: Accessed via the Sensors menu. You can manually switch to Dead Reckoning (DR) mode by deselecting the GPS sensor here. Share public link Plotting waypoints, adjusting turn radii,

The system continuously pools data from primary bridge sensors. You must know how to identify sensor failure: GPS/GNSS, Gyro Compass, Speed Log.

Transas Navi-Sailor 4000 Test Answers & Vetting Guide (2026 Updated)

Pressing the MOB button immediately drops an emergency waypoint at the vessel's current coordinate, logs the exact UTC time, and switches the display to a localized tracking mode centered on the casualty position. Dual ECDIS Backup Failure If the Master ECDIS fails:

Open the Chart Panel -> Catalog -> Select area/chart -> Right-click -> Load . Q: How do you check if the chart is updated?