Vijeo Designer 62 Tutorial -

This is where you build the "dynamic screens" that operators see.

Vijeo Designer 6.2 is a Windows-based software that allows users to design, configure, and test HMIs for various devices, including PLCs, variable frequency drives, and other automation devices. The software provides a range of tools and features, including:

Start by defining your hardware and communication protocols.

When you launch Vijeo Designer for the first time, a welcome dialog box appears. Make sure that is selected, then click Next to begin. The new project wizard will guide you through a few essential steps: vijeo designer 62 tutorial

In the , right-click Variables and select New Variable .

Make the motor status follow the start/stop command.

Create three core screens: 01_Main_Dashboard , 02_Manual_Control , and 03_Alarm_History . This is where you build the "dynamic screens"

: You can add multiple HMI "targets" to a single project, allowing them to share information. Select Hardware : Choose your specific target model (e.g., for smaller devices). Set Security

Now, when he simulated the project, the variable changed from 0 to 1. He was communicating!

Alex, a junior automation engineer, had just finished wiring a Schneider Modicon M221 PLC to a conveyor belt system. The physical wiring was perfect: 24V DC was flowing, sensors were lighting up, and the motor hummed when forced on. When you launch Vijeo Designer for the first

Your HMI application will consist of one or more (screens). To create a new panel, right‑click on the Panels folder in the Navigator and select New Panel . Give the panel a name, such as “Main” or “Overview”. The panel workspace then appears as a blank canvas where you can place graphical objects.

If the autorun does not start automatically, go to Start → Run , enter x:\INSTALL.EXE (where is the letter of your DVD‑ROM drive), and click OK. At the end of the installation, you may be prompted to restart your computer – this is required to update all system components.

After validation succeeds, you need to the project. Building compiles the Java‑based runtime application that will execute on the HMI device. Click Build → Build Project (or press the appropriate toolbar button). The build process reports any remaining Java compilation errors.