Xnx Universal Transmitter Quick Start Guide [extra Quality] < 100% Certified >

The XNX transmitter must be mounted securely to a wall, pipe, or ceiling where gas leaks are most likely to occur. Mounting Options

Wiring diagrams for analog loops Share public link

✔ Keep a copy in your tool bag for wiring pinouts and LED codes. ✔ For first-time users, read the full manual before connecting power — but for repeat installs, this guide is perfect. Xnx Universal Transmitter Quick Start Guide

The transmitter operates on 16 to 32 VDC (24 VDC nominal). Use shielded, twisted-pair cable to protect against electromagnetic interference.

: Connect Terminal 3 for discrete current output. Sensor Connections The XNX transmitter must be mounted securely to

Verify the Explosion Proof rating (Class I, Div 1 vs. Div 2) matches your hazardous area classification. If the label says "Non-incendive" but your zone requires "Flameproof," stop immediately.

The following table provides quick guidance for resolving common faults. Refer to the full technical manual for complete diagnostic information. The transmitter operates on 16 to 32 VDC (24 VDC nominal)

Routine calibration ensures measurement accuracy and sensor health.

The XNX interface is operated entirely non-intrusively via four magnetic switches on the glass display cover. Use the provided magnetic wand to activate the contacts: : Exit current menu or cancel an entry.

Avoid areas subject to extreme vibration, direct radiant heat, or rapid temperature fluctuations. 2. Electrical Wiring and Terminals