Zk-pp2k Manual __link__ 【PROVEN – 2024】
DC 3.3V to 30V (with anti-reverse protection) Frequency Range: 1Hz to 150KHz
It was a masterpiece of industrial cruelty. Matte black finish, polymer grip roughened for a hand that might be shaking, and a barrel that looked thick enough to punch through the hull of a shuttle. Stamped on the side, in faded white stencil, was the model designation: .
Turn the screw clockwise.
DC 3.3V to 30V (output amplitude matches input) Current Capacity: 8A maximum (high power) Frequency Range: 1Hz to 150KHz (2% accuracy) Duty Cycle: 0.00% to 100% Pulse Count: 1 to 9,999 or Infinite ( ---- ) Time Range: 0.000s to 9999s for delay and pulse width 🛠️ Quick Operation Guide Switching Modes Toggle PWM vs. PULSE: Hold the SET button for 6 seconds . PWM Mode: Identified by the % symbol on the screen. PULSE Mode: The % symbol disappears. Mode 1: PWM Mode (Continuous Signal) Use this for simple speed control or dimming: FREQ+ / FREQ- : Set the frequency (1Hz–150kHz). DUTY+ / DUTY- : Set the duty cycle (0%–100%). Mode 2: PULSE Mode (Cycles & Delays) Use this for specific pulse counts or timed bursts: Positive Pulse Width: Set using P+ and P- . Negative Pulse Width: Set using N+ and N- . Start Delay & Pulse Number: Hold SET for 2 seconds until "SET" appears at the bottom. Use P+ / P- for the Delay Time .
He squeezed. Snap.
The ZK-PP2K is a versatile, dual-mode signal generator widely used by electronics hobbyists, automotive technicians, and engineers. It functions as both a Pulse Width Modulation (PWM) generator and a pulse generator. This comprehensive manual covers its technical specifications, wiring configurations, operating modes, and advanced applications. 1. Technical Specifications
Turn the magazine upside down. Align your Green Gas canister nozzle straight into the fill valve at the base of the magazine. Press down firmly for 5 to 7 seconds. Zk-pp2k Manual
Ideal for precise control of solenoid valve cycles or stepper motor steps. Key Setup Steps
Used primarily for speed regulation (motors) or dimming (LEDs). Frequency and Duty Cycle. Function: Controls the power delivered to the load. B. PULSE Mode (No '%', displays P+ / P- / delay) Turn the screw clockwise
Switching between the two modes is handled by the . Long-pressing SET for more than 6 seconds toggles the mode. The presence or absence of the % symbol on the LCD indicates which mode is active.